If you haven't studied the 'See How It Works' menu option, please do so now - and then return to this page.

The true flexibility of the EazyRizer design comes to the fore when lifting Scooters, for here we rely upon one Beam Mounting bracket to support the rear of the machine and one Wheel Mounting bracket to lift the front wheel.

Although these brackets normally come in matching pairs, we offer a special Combination Set specifically for Scooters.

EazyRizer's Beam Mounting brackets are ideal for this particular purpose since they allow you to firmly clamp both legs of the center stand, holding the machine rigidly to the lift - offering you a rock-solid method of raising these machines.

Beam & Wheel Mounting Combination Set

Click to Magnify

The above photo shows how you can 'mix and match' brackets to
fulfil any purpose. If you study the diagram below you will notice
'hook bolts' attached to the beam. It is those hook bolts that are
slipped over the center stand legs of the scooter that lock the
machine solidly to the lift.

Here we see two Beam Mounting brackets located on a lifting arm. To lift a scooter one bracket will be slid along the arm to the ideal lifting position under the center stand legs, whereupon the bracket is located to the lifting arm by securing bolts. The slotted arrangement in the bracket will allow you to position the hook bolts to align precisely with your center stand. A Wheel Mounting bracket will be inserted in the other end of the lifting arm and slid in and out to suit the location of the front wheel. Please remember that the top surface of the mounting brackets have a protective rubber pad to ensure that EazyRizer cannot possibly damage or scratch your paintwork, and that the hook bolts are equipped with pvc sleeves to do likewise.

There is no metal to metal contact.

Once this operation is complete (done in a matter of seconds on either side) the scooter can safely be raised to it's full working height. Any size and weight of scooter can be lifted in this manner, providing that it has a center stand. This facilitates 360 degree unrestricted access to the engine compartment.

There are no hydraulics to worry about.
Click to Magnify

EazyRizer was designed with inherent failsafe characteristics which mean that the lift cannot possibly come down on its own - regardless of how long you leave it airborne. You do not secure the scooter via it's side stand when using this method.

Raising a scooter to an ideal working height poses a
unique engineering challenge, but as usual,
EazyRizer is up to the task.

The Safest Bike Lift in the World!

Money Back Guarantee
If you are not completely satisfied with your new EazyRizer
lift you may return it within 30 days of invoice date for a full
refund, less shipping charges of course. Having first obtained
a Return Materials Authorization number you would need to
return the product within the original packaging and in the
same condition as it left the factory.

Lifetime Warranty
We are so confident that EazyRizer will perform perfectly
for year after year that we offer a lifetime mechanical return
to base warranty on all our lifts. This offer is applicable to
the original purchaser of the lift and is subject to the user
following our operational instructions as to the use and
maintenance of the lift.

Tested By Lloyds
Lloyds British (Konecranes) Limited tested the lift to extreme
conditions. During these brutal tests, EazyRizer withstood loads
of TWO TONS without failure!

Full CE Certification
EazyRizer underwent full testing under the United Kingdom
Machinery Regulations Act in order to be accredited with full
Community European CE Certification.

See how EazyRizer defies all reasonable attempts to knock
it over! Even after being brutally manhandled, the cantilever
design ensures that it settles gently back to the ground.

Less violent inputs should result in a slide
rather than a tilt.

Click to Magnify

'Your' Mounting Bracket Options

For Scooters you require our Beam & Wheel Combination Set.

Click to Magnify

Many owners choose to order more than one set of mounting brackets to enable them to service any type of bike in the future. It is possible to mix one bracket from each type of mounting set where this is advantageous. If you wish to be able to service any type of bike you may well choose to equip yourself with a full set of Beam, Wheel and Multi-Mounting options.

Wheel Mounting Click to Magnify

Multi-Mounting Click to Magnify

Beam Mounting
Click to Magnify

Optional Security Locking System

Click to Magnify

You are repairing the brake system.  A casual glance belies the fact that crucial adjustments are necessary before the bike is safe for the road.  Be it through mischief, youthful zeal, malice or impatience, someone rides off on the bike and it proves fatal!

Don't wait for the question of blame to be resolved later.
As the mechanic in charge, take total control of the situation.
Use our Security Locking System for absolute peace of mind.

EazyRizer makes maintenance easy.  Our Security System makes is safe. 
Make sure your bike remains airborne until you say so!

This system is also the perfect Anti Theft Device.

Manufacturer Notes/Comments

For late breaking news affecting specific manufacturers and models, click on the
appropriate link to access the pop-up window for your particular bike:

If your manufacturer or bike is not listed above:
DO NOT WORRY - all it means is that there are no stop press
news items or specific factors concerning your machine - simply
go by the standard lifting options within these pages.

Prices, Delivery, Queries & Ordering

For current prices, delivery matters, technical queries
and placing orders - please click the icon below:

Or if you are still searching for information, please try visiting our
Frequently Asked Questions page with Customer Comments